Document is repealed

To implement the Rector´s Order No. 9/2020 on the provision of study programmes and conduct of examinations at CTU in Prague in connection with measures to reduce the risks of infection with the corona virus as amended and potential other addenda and potential other regulations which replace this instruction, and methodological instructions issued by the CTU Vice-Rector for Bachelor´s and Master´s Study, pursuant to Art. 18 Para. 4 of the Statute of the Faculty of Civil Engineering CTU in Prague, I hereby issue this Measure:

With a view to the epidemiological situation in the Czech republic, the Dean of the Faculty of Civil Engineering CTU in Prague (hereinafter "FCE") hereby sets out measures for the preparation and course of the examination session of the winter semester of the 2020/2021 academic year (hereinafter "ES WS 20/21"), relating to the specification of the method, planning and practice of the verification of study results of students in Bachelor´s and Master´s study programmes implemented at FCE and the rules for face-to-face instruction in courses for which face-to-face instruction was required pursuant to The Methodological Instruction of Vice-Dean for Education No. 2/2020 and which could not take place in the period from 21.9.2020 to 20.12.2020.

1. The verification of study results by granting a credit or a classified credit will be performed exclusively in the distance format:
   • based on attendance in non-contact instruction,
   • based on an elaborated semester project submitted by the student only in digital form,
   • based on an on-line test,
   • based on an oral video interview,
   • by a combination of the above options.
2. The deadlines and the way of handing in student´s work or verification of knowledge are specified by the course guarantor in cooperation with the Head of the respective Department in charge of the course.
3. If a student is unable to comply with the conditions for the course completion in a prescribed standard way, the teacher will allow them an individual way of submission.

1. Examinations will be held in the distance format to the maximum possible extent using the following options:
   • video interviews for oral examinations (MS Teams application is recommended),
   • testing via electronic platforms for written examinations (Moodle or MS Teams are recommended),
   • combination of the above options.
   In courses where possible and worthwhile, direct examinations can be replaced by the elaboration of individually assigned student´s own work.
2. The courses which can be tested in the face-to-face format are specified by the Dean and listed in Annex No. 1 to this Measure.
3. To perform face-to-face testing the limit of the maximum number of 10 students in the examination room applies for the whole time of ES WS 20/21, and the distancing of at least 2 metres between students must be maintained.
4. The course guarantor in cooperation with the Head of the respective Department in charge of the respective course are responsible for the organization of examinations in the face-to-face format and the observation of all public health and safety measures.
5. The following booking schedule will apply for planning face-to-face examinations:
   • Pre-booking 30. 11. – 3. 12. 2020
     • K101 and K132 courses which can be tested face-to-face, see Annex No. 1 to this Measure.
     • Only lecture halls in Building C are available for booking.
     • Examination dates for courses listed in Annex No. 2 to this Measure cannot be set for Fridays. The reason is elimination of a collision with face-to-face instruction.
     • A limit of 10 students in a lecture hall is set for each examination date.
     • K101 will plan examinations from 9.00 and from 13.00.
     • K132 will plan examinations from 8.00 or 10.00 and from 12.00 or 14.00.
     • For the reason of a compulsory break for the lecture hall disinfection, one hour more must be booked than the time needed for the examination itself. E.g. if an examination takes 3 hours and starts at 9.00, book the lecture hall until 13.00.

   • Standard booking 4. 12. – 9. 12. 2020
     • Courses taught by all departments which can be tested face-to-face, see Annex No. 1 to this Measure.
     • Only lecture halls in Building C are available for booking, if their capacity is not enough, booking will be extended to include lecture halls and classrooms on the 2^nd over ground storey of Building A.
     • Examination dates for courses listed in Annex No. 2 to this Measure cannot be set for Fridays. The reason is elimination of a collision with face-to-face instruction.
     • A limit of 10 students in a lecture hall is set for each examination date.
     • For the reason of a compulsory break for the lecture hall disinfection, one hour more must be booked than the time needed for the examination itself. E.g. if an examination takes 3 hours and starts at 9.00, book the lecture hall until 13.00.

     Booking procedure:
     Booking lecture halls for ES WS 20/21 will be performed via the FCE booking system at https://www.fsv.cvut.cz/rezervace

   • The teacher chooses a room (lecture hall in Building C).
   • Choose the day and time. The preview displays the room occupancy.
   • The teacher asks for booking on the respective date.
   • "Study" must be filled in Category.
   • The course code must be filled in "Event name".
   • "Book" moves the requirement to the approval process. The teacher is informed of the booking approval or refusal by e-mail.

     Please send your potential suggestions, remarks and questions related to the booking system to the Faculty IT Centre via HelpDesk.

6. The testing method (face-to-face or distance) is obligatory for the whole examination session.
7. Students must be informed about the testing method and examination dates no later than by 10. 12. 2020. After this date, the teacher can further increase the number of examination dates. The decrease in the number of examination dates listed by 10.12. is not allowed. The dates must be uniformly spread over the whole ES WS 20/21 and their minimum capacity must account for 1.5x the number of students registered for the course.
8. For the reason of elimination of a collision with face-to-face instruction, no examination dates for courses listed in Annex No. 2 to this Measure can be listed for Fridays.
9. In justified cases, a student may ask the Dean (via FCE Student Administration) for an individual change in the examination format.
10. If a student is unable to participate in the respective type of testing for objective reasons (e.g. technical problems, health related reasons or complicated life situation in connection with the coronavirus crisis), the student may ask the Dean (via FCE Student Administration) for an individual extension of the examination session until the end of the examination session of the spring semester of the 2020/2021 academic year.

1. Final graduation examinations (hereinafter "FGE") will be held in the face-to-face format to the maximum possible extent; a semi-contact or distance format is possible based on a request by the Head of Department, and is at the Dean´s discretion.
2. In justified cases, a student may individually ask the Dean (via FCE Student Administration) for a change in the FGE format to the distance format.
3. FGE will be held as public examinations provided the limit of 10 persons in the room is not exceeded. If this limit is exceeded, FGE will be held with the exclusion of the public, in which case an audio or audio and video record of the course of FGE will be made, which will be filed at the Department organizing FGE for a period of 5 years.
4. Article 6 Para. 2 of the Dean´s Directive No. 1/2020 for the Implementation of Bachelor´s and Master´s Study Programmes at the Faculty of Civil Engineering CTU in Prague is amended as follows:
   The Board for the Defence of Final Graduation Theses need not comprise a prominent expert who is not a CTU employee.
5. Oral examinations in thematic areas and the defence of the final thesis in the respective branch of study can be held together before the same board and on the same date. The Examination Board must comprise the examiner for the respective thematic area to whom the student has registered as a member.
6. The student will learn the result of the examination immediately after the examination and will no longer stay on the Faculty campus for no reason. There will be no common opening and closing ceremony.
7. During the examination, the public health and safety measures currently in force must be observed. The Head of the Department that organizes FGE is responsible for the compliance with public health and safety measures.

1. In courses specified by the Dean for which face-to-face instruction was required pursuant to The Methodological Instruction No. 2/2020 of Vice-Dean for Education and which could not take place in the period from 21.9.2020 to 20.12.2020, this instruction can be held in the block format during ES WS 20/21, always on Fridays.
2. If the time period of ES WS 20/21 does not suffice for the implementation of face-to-face instruction in the courses specified by the Dean so that the courses can be properly completed including the verification of knowledge by the end of ES WS 20/21, the Faculty Dean allows the instruction and verification of knowledge in these courses to take place also in the spring semester of the 2020/2021 academic year. The instruction can be held in the block format in compliance with public health rules in force and must not collide with instruction in other courses.
3. The organization of instruction is at the discretion of the course guarantor in cooperation with the Head of Department and the study programme guarantor, and the Vice-Dean for Education will be informed.
4. Face-to-face instruction must not collide with examinations or other instruction for the respective group of students.

1. This Measure comes into effect on the day of announcement.
2. The Measure regulates the period from 4. 1. 2021 to 14. 2. 2021 regardless of any potential Government loosening measures in connection with the improvement of the epidemiological situation in January and February 2021.

prof. Ing. Jiří Máca, CSc.
Dean

Annex No. 1

Courses which can be completed in the face-to-face format in ES WS 20/21

Code      Name
101KG01   Konstruktivní geometrie
101KOGG   Konstruktivní geometrie
101KGR    Konstruktivní geometrie R
101KGA1   Konstruktivní geometrie A
101MA01   Matematika 1
101M1A    Matematika 1A
101MM1G   Matematika 1G
101MAR1   Matematika R1
101MT01   Mathematics 1
101MA03   Matematika 3
101M3A    Matematika 3A
101MA04   Matematika 4
101M04B   Matematika 4B
101MAT4   Mathematics 4
101MM4G   Matematika 4G
101MA02   Matematika 2
101M2A    Matematika A2
101MAR2   Matematika R2
101PMSG   Pravděpodobnost a mat. statistika
101SPS    Spolehlivost systémů
101STM    Stochastické metody v ŽP
124HRRB   Historické konstrukce a rekonstrukce budov
124PDRC   Poruchy, degradace, rekonstrukce
124PS2C   Pozemní stavby 2C
124PS03   Konstrukce pozemních staveb
124PSA1   Pozemní stavby A1
124PSA4   Pozemní stavby A4
124PSI1   Pozemní stavby 1I
124PSR1   Pozemní stavby 1R
124SF01   Stavební fyzika
124SF1    Stavební fyzika 1
124SFA    Stavební fyzika 1A
124PS2R   Pozemní stavby 2R
126PLCO   Plánování a controlling
132DY02   Dynamika stavebních k-cí
132MPV    Modelování k-cí při požáru
132NAK    Numerická analýza k-cí
132PRA    Pružnost a pevnost A
132PRPE   Pružnost a pevnost
132PRPM   Přetváření a porušování mat.
132PRUR   Pružnost a pevnost R
132SMA1   Stavební mechanika 1A
132SMA2   Stavební mechanika 2A
132SMR2   Stavení mechanika R2
132SM01   Stavební mechanika 1
132SM3    Stavební mechanika 3
133BK01 + 133BZKQ   Betonové a zděné konstrukce 1
133BZA1   Betonové a zděné konstrukce v arch. 1
133B03C + 133B03K   Betonové konstrukce 3
133NNKB + 133NKRB   Navrhování nosných konstrukcí - beton
133PSBZ   Požární spolehlivost beton. a zděných konstrukcí
133RBZS   Realizace beton. a zděných konstrukcí
133CM01   Concrete and Masonry Structures 1
133CM03   Concrete and Masonry Structures 3
134FRSS   Fire Resistance of Steel and Timber Structures
134NKPZ   Nosné konstrukce za požáru
134NKRO   Nosné konstrukce R – ocel
134NNKO   Navrhování nosných konstrukcí - ocel
134OCM1   Ocelové mosty 1
134ODA2   Ocelové a dřevěné konstrukce v arch. 2
134ODKV   Ocelové a dřevěné konstrukce
134OK01   Ocelové konstrukce 1
134O02C   Ocelové konstrukce 2C
134O02K   Ocelové konstrukce 2K
134PSOD   Požární spolehlivost ocelových a dřevěných konstrukcí
134ROD    Realizace ocel. a dřevěných konstrukcí
134STBR   Steel Bridges
134ST01   Steel Structures
134ST02   Steel structures 2
134TBST   Timber Based Structures
134TMZQ   Tepelná a mechanická zatížení Q
135GEA    Geologie
135GM01   Geomechanika 1
135GM2I   Geomechanika 2I
135ZS01   Zakládání staveb 1
135ZSVT   Zakládání staveb
135GET    Geotechnika
135PSMH   Podzemní stavby a mechanika hornin
141HYA    Hydraulika
141HYDR   Hydraulika R
141HYA2   Hydraulika 2
141KMH    Klimatologie, meteorologie, hydrologie
141APHD   Aplikovaná hydrologie
143HPVO   Hydraulika podzemní vody

Annex No. 2

 
Code      Name
101KG01   Konstruktivní geometrie 
101KGR    Konstruktivní geometrie R 
101KOGG   Konstruktivní geometrie 
101MA01   Matematika 1 
101MA02   Matematika 2 
101MA03   Matematika 3
101MAR1   Matematika R1 
101MM1G   Matematika 1G
101MM4G   Matematika 4G 
101PMSG   Pravděpodobnost a matem. statistika 
101STM    Stochastické metody v ŽP 
102FY_1   Fyzika 1G
105SVAI   Společenské vědy 
122MEST   Mechanizace staveb 
122PSBL   Provozování a správa budov L 
122TS03   Technologie staveb 03 
123CHE    Chemie 
123SH01   Stavební hmoty 
124MDPV   Modelování dynamiky požáru a evakuace 
124PRPO   Právo a požární ochrana
124PSA4   Pozemní stavby A4 
124PSR1   Pozemní stavby 1R 
124SPP    Specifické požární provozy
124UPST   Úvod do pozemního stavitelství 
126BIMB   BIM-informační modelování budov 
126FIMA   Finanční management 
126MJKP   Management jakosti a rizika 
126OCNE   Oceňování nemovitostí 
126PM01   Projektový management 1 
126STMN   Stavební management 
127UB01   Urbanismus 1
127VIS    Veřejná infrastruktura sídel 
128TG     Teorie grafů
129DA01   Dějiny architektury 1
132PRPE   Pružnost a pevnost
132SM01   Stavební mechanika 1 
132SMR1   Stavební mechanika R1 
133BZA1   Betonové a zděné konstrukce v arch. 1 
133BZKV   Betonové a zděné konstrukce V 
134NKPZ   Nosné konstrukce za požáru 
134ODKV   Ocelové a dřevěné konstrukce 
135GM01   Geomechanika 1 
135GM2I   Geomechanika 2I
135ZSVV   Zakládání staveb V
136DSZP   Dopravní stavby a životní prostředí 
141APHD   Aplikovaná hydrologie 
141HYGI   Hydrologie
141HYKL   Hydrologie a klimatologie 
141KMH    Klimatologie, meteorologie, hydrologie 
141YHMM   Hydroekologický monitoring a modelování 
142JVCE   Jezy a vodní cesty 
142VHSO   Vodohospodářské soustavy 
142VIZP   Vodohospodářské inž. a životní prostředí 
143HPVO   Hydraulika podzemní vody 
143HPVO   Hydraulika podzemní vody 
143ODKO   Odpady a kontaminace 
143RPZP   Rozhodovací procesy v ŽP 
143TOK1   Tvorba a ochrana krajiny 
143VK2    Vodní hospodářství krajiny 2 
143YPEO   Protierozní ochrana 
154ZAIG   Základy automatizace v inženýrské geodézii
154EZKA   Ekonomika v zeměměřičství a katastru
154TCV1   Teorie chyb a vyrovnávací počet
155DPRZ   Dálkový průzkum Země 
155FTG1   Fotogrammetrie 1 
155GIS1   GIS 1
155GPL    Geometrické plány
155IN2G   Informatika 2 
155KAR1   Kartografie 1
155KAT3   Kartografie 3 
155KAT3   Kartografie 3
155MAPO   Mapování 
155MSPD   Moderní metody sběru prostorových dat
155PKAZ   Právo v KN a zeměměřičství
155TG2    Teoretická geodézie 2 
155UZPR   Úvod do zpracování prostorových dat
155YCN1   Oceňování nemovitostí
155YOBP   Objektové programování